Automatic Cutter Supplies
Polyoverlay
Tip: Polyoverlay is either LDPE or HDPE (low or high density poly sheeting) that is placed over a lay to facilitate cutting
under a vacuum. With the inception of the Covid-19 virus, it has been acquired for the production of medical gowns.
Tip: Polyoverlay is either LDPE or HDPE (low or high density poly sheeting) that is placed over a lay to facilitate cutting
under a vacuum. With the inception of the Covid-19 virus, it has been acquired for the production of medical gowns.
- High and low density
- Size (42" - 142"), most frequently ordered: 72", 76" 81.5", 84", 90", 96"
- Gauges (.6 - 2 mils), most frequently ordered: 1, 1.25, 1.5
- A typical order contains 2000 lbs. with 16 rolls placed on a skid, where each roll is 72" - 84" wide
Perforated Kraft
Tip: Perforated Kraft is used with automated cutters to prevent
bristle penetration while cutting under a vacuum.
Tip: Perforated Kraft is used with automated cutters to prevent
bristle penetration while cutting under a vacuum.
- Recycled Kraft (tip: preferred by greater than 95% of our customers, because it is less expensive) or Virgin Kraft
- Width - 36", 48", 54", 57", 60", 63", 66", 72"
- Single wound or centerfold sheeting
4 Styles
Super Perf
- .5" between 3/16" darted perforations - Least expensive - Less fabric penetration into bristle blocks - Customers have reported easier product movement and better vacuum control |
|
|
CP Micro Perf - Most Popular |
|
|
7/8" - 1.75" between off-set holes 2" - 2.00" between off-set holes |